HP G3 KVM User Manual Download Page 74

Page: 74 / 81

Support and other resources 74

Support and other resources

Accessing Hewlett Packard Enterprise Support

•

For live assistance, go to the Contact Hewlett Packard Enterprise Worldwide website

(

http://www.hpe.com/assistance

•

To access documentation and support services, go to the Hewlett Packard Enterprise Support

Center website (

http://www.hpe.com/support/hpesc

Information to collect

•

Technical support registration number (if applicable)

•

Product name, model or version, and serial number

•

Operating system name and version

•

Firmware version

•

Error messages

•

Product-specific reports and logs

•

Add-on products or components

•

Third-party products or components

Accessing updates

•

Some software products provide a mechanism for accessing software updates through the product

interface. Review your product documentation to identify the recommended software update

method.

•

To download product updates, go to either of the following:

Hewlett Packard Enterprise Support Center

Get connected with updates

page

(

http://www.hpe.com/support/e-updates

)

Software Depot website (

http://www.hpe.com/support/softwaredepot

)

•

To view and update your entitlements, and to link your contracts and warranties with your profile, go

to the Hewlett Packard Enterprise Support Center

More Information on Access to Support

Materials

page (

http://www.hpe.com/support/AccessToSupportMaterials

IMPORTANT

: Access to some updates might require product entitlement when accessed

through the Hewlett Packard Enterprise Support Center. You must have an HP Passport set up

with relevant entitlements.

Websites

•

Hewlett Packard Enterprise Information Library (

http://www.hpe.com/info/enterprise/docs

)

•

Hewlett Packard Enterprise Support Center (

http://www.hpe.com/support/hpesc

)

•

Contact Hewlett Packard Enterprise Worldwide (

http://www.hpe.com/assistance

)

Summary of Contents for G3 KVM


















































































Search results

Summary of Contents for G3 KVM

Reviews:

Related manuals for G3 KVM

Brands by name

Popular brands

HP G3 KVM, User Manual

Search results

Summary of Contents for G3 KVM

Reviews:

Related manuals for G3 KVM

Brands by name

Popular brands