HP G3 KVM User Manual Download Page 26

Page: 26 / 81

Local port operation 26

Accessing the Setup dialog box

From the Main dialog box ("

Accessing the Main dialog box

" on page

), click

Setup.

The Setup dialog

box appears.

Managing routine tasks for servers

Button

Function

Menu

Changes the server listing between a numerical listing using the port or EID numbers

and an alphabetical listing using the server name. After you press

Print Scrn

changes the delay time before the Main dialog box appears.

Security

Sets password to restrict server access. A valid password must be alphanumeric

and contain a minimum of five characters and a maximum of 15 characters.

Permitted characters are case sensitive and can consist of A–Z, 0–9, spaces and

hyphens.

Enables the Screen Saver mode.

Flag

Changes the display, timing, color, and location of the status flag.

Language

Changes the OSD interface language.

Devices

Identifies device types attached to the KVM Console Switch, including servers and

other legacy console switches. Also modifies the type of legacy console switches.

Names

Names the IA.

Keyboard

Changes the keyboard country code reported by the IA if queried.

Scan

Sets up custom scan patterns for up to 16 servers.

Network

Selects the network speed, transmission mode, and configuration.

Changing the display behavior

From the Menu dialog box ("

Accessing the Menu dialog box

" on page

), the display order of servers,

HPE G3 KVM Console Switch connection mode, and a time to delay display of the OSD after pressing the

Print Scrn

key can be changed. The display order setting alters how servers display in several screens,

including the Main, Devices, and Broadcast dialog boxes.

Summary of Contents for G3 KVM


















































































Search results

Summary of Contents for G3 KVM

Reviews:

Related manuals for G3 KVM

Brands by name

Popular brands

HP G3 KVM, User Manual

Search results

Summary of Contents for G3 KVM

Reviews:

Related manuals for G3 KVM

Brands by name

Popular brands