HP FlexNetwork NJ5000, User Manual

Page: 59 / 475

47
Uploading a file
IMPORTANT:
Uploading a file takes some time. Hewlett Packard Enterprise recommends not performing any
operation on the Web interface during the upload.
1.
Select
Device
>
File Management
from the navigation tree to enter the file management page
(see Figure 40 ).
2.
In the
Upload File
area, select the medium for saving the file from the
Please select disk
list.
3.
Click
Browse
to navigate to the file to be uploaded.
4.
Click
Apply
.
Removing a file
1.
Select
Device
>
File Management
from the navigation tree to enter the file management page
(see Figure 40 ).
2.
Do one of the following:
{
Click the icon of a file to remove the file.
{
Select a file from the file list and click
Remove File
.
To remove multiple files, repeat step 2, or select the files from the file list and click
Remove File
.
Specifying the main boot file
1.
Select
Device
>
File Manage
from the navigation tree to enter the file management page
(see Figure 40 ).
2.
From the
Please select disk
list, select the medium that holds the application file to be used as
the main boot file.
3.
Select the application file (
.bin
or
.app
file) from the file list.
4.
Click
Set as Main Boot File
.