HP FlexNetwork NJ5000, User Manual

Page: 52 / 475

40
Configuring syslog
System logs record network and device information, including running status and configuration
changes. With system logs, administrators can take corresponding actions against network
problems and security problems.
The system sends system logs to the following destinations:
•
Console
•
Monitor terminal, a terminal that has logged in to the device through the AUX or VTY user
interface
•
Log buffer
•
Log host
•
Web interface
•
Log file
Displaying syslogs
1.
Select
Device
>
Syslog
from the navigation tree.
The page for displaying syslogs appears. You can click
Reset
to clear all system logs saved in
the log buffer on the Web interface. You can click
Refresh
to manually refresh the page, or you
can set the refresh interval on the
Log Setup
page to enable the system to automatically
refresh the page periodically. For more information, see " Setting buffer capacity and refresh
interval ."
Figure 33 Displaying syslogs
2.
View system logs.
Table 18 Field description
Field Description
Time/Date Displays the time/date when the system log was generated.