HP FlexNetwork NJ5000, User Manual

Page: 232 / 475

220
Step Remarks
3.
Configuring MLD snooping in
a VLAN
Required.
Enable MLD snooping in the VLAN and configure the MLD snooping
version and querier.
By default, MLD snooping is disabled in a VLAN.
When you enable MLD snooping, follow these guidelines:
•
Enable MLD snooping globally before you enable it for a VLAN.
•
MLD snooping for a VLAN takes effect only on the member ports
in that VLAN.
4.
Configuring MLD snooping
port functions
Optional.
Configure the maximum number of IPv6 multicast groups and
fast-leave processing on a port of the specified VLAN.
When you configure MLD snooping port functions, follow these
guidelines:
•
Enable MLD snooping globally before you enable it on a port.
•
MLD snooping enabled on a port takes effect only after MLD
snooping is enabled for the VLAN.
5.
Displaying MLD snooping
multicast forwarding entries
Optional.
Enabling MLD snooping globally
1.
Select
Network
>
MLD snooping
from the navigation tree.
2.
Click
Enable
for MLD snooping.
3.
Click
Apply
.
Figure 221 Enabling MLD snooping globally
Enabling dropping unknown IPv6 multicast data globally
1.
Select
Network
>
MLD snooping
from the navigation tree.
2.
Click
Enable
for
Drop Unknown IPv6 Multicast Data
.