213
Configuration procedure
Configuring Router A
Enable IP multicast routing globally, enable PIM-DM on each interface, and enable IGMP on
GigabitEthernet 1/0/1. (Details not shown.)
Configuring Switch A
1.
Create VLAN 100:
a.
From the navigation tree, select
Network
>
VLAN
.
b.
Click the
Create
tab.
c.
Enter
100
as the VLAN ID.
d.
Click
Apply
.
Figure 213 Creating VLAN 100
2.
Assign GigabitEthernet 1/0/1 through GigabitEthernet 1/0/3 to VLAN 100:
a.
Click the
Modify Port
tab.
b.
Select GigabitEthernet 1/0/1, GigabitEthernet 1/0/2, and GigabitEthernet 1/0/3 in the
Select
Ports
area.
c.
Select
Untagged
for
Select membership type
.
d.
Enter
100
as the VLAN ID.
e.
Click
Apply
.
Summary of Contents for FlexNetwork NJ5000
