40
Logging in to the router through the AUX port
1.
After powering on the router, connect the console cable to the console port.
To configure the AUX port:
Step Command
1.
Enter system view.
system-view
2.
Enter AUX user interface view.
user-interface aux 0
3.
Set the authentication mode.
authentication-mode none
4.
Set the user privilege level.
user privilege level 3
2.
Plug the D-9 female connector to the serial port of the configuration terminal or PC.
3.
Connect the RJ-45 connector to the AUX port of the router. Then you can log in to the router
through the AUX port.
For more information about how to log in to the router through an AUX port, see
HPE FlexNetwork
HSR6800 Routers Fundamentals Configuration Guide
.
Configuring basic settings
Step Command Remarks
1.
Set the current time and date.
clock datetime
time
date
Optional.
Available in user view.
2.
Enter system view.
system-view
Available in user view.
3.
Enter Ethernet interface view.
interface
interface-type
interface-number
N/A
4.
Specify an IP address for the
interface.
ip address
ip-address
{
mask-length
|
mask
} [
sub
]
By default, no IP address is
assigned to any interface.
5.
Return to system view.
quit
Available in any view.
6.
Specify a static route.
ip route-static
dest-address
{
mask
|
mask-length
} {
next-hop-address
|
interface-type interface-number
[
next-hop-address
] |
vpn-instance
d-vpn-instance-name
next-hop-address
}
track
track-entry-number
[
preference
preference-value
] [
tag
tag-value
]
[
description
description-text
]
By default, the preference
of a static route is 60, tag is
0, and no description is
configured.
7.
Save the current
configuration to the startup
configuration file in the root
directory of the storage
media.
save
[
safely
] [
backup
|
main
]
[
force
]
Available in any view.
8.
Verify the running
configuration.
display current-configuration
Available in any view.