107
SNMP on the device. For more information about SNMP configuration, see the network
management and monitoring configuration guide for the device.
To enable SNMP notifications for MPLS TE:
Step Command Remarks
1.
Enter system view.
system-view
N/A
2.
Enable SNMP
notifications for MPLS TE.
snmp-agent trap enable te
By default, SNMP notifications for
MPLS TE are enabled.
Displaying and maintaining MPLS TE
Execute
display
commands in any view and
reset
commands in user view.
Task Command
Display information about explicit paths.
display explicit-path
[
path-name
]
Display link and node information in an IS-IS
TEDB.
display isis mpls te advertisement
[ [
level-1
|
level-2
] | [
originate-system
system-id
|
local
] |
verbose
] * [
process-id
]
Display sub-TLV information for IS-IS TE.
display isis mpls te configured-sub-tlvs
[
process-id
]
Display network information in an IS-IS TEDB.
display isis mpls te network
[ [
level-1
|
level-2
] |
local
|
lsp-id
lsp-id
]* [
process-id
]
Display IS-IS tunnel interface information.
display isis mpls te tunnel
[
level-1
|
level-2
]
[
process-id
]
Display DS-TE information.
display mpls te ds-te
Display bandwidth information on MPLS
TE-enabled interfaces.
display mpls te link-management
bandwidth-allocation
[
interface
interface-type
interface-number
]
Display information about discovered PCEs.
display mpls te pce discovery
[
ip-address
]
[
verbose
]
Display CRLSP information in a PCE LSPDB.
display mpls te pce lspdb
[
plsp-id
plsp-id
]
[
verbose
]
Display PCC and PCE peer information.
display mpls te pce peer
[
ip-address
] [
verbose
]
Display PCC and PCE statistics.
display mpls te pce statistics
[
ip-address
]
Display MPLS TEDB information.
display mpls te tedb
{ {
isis
{
level-1
|
level-2
} |
ospf
area
area-id
} |
link
ip-address
|
network
|
node
[
local
|
mpls-lsr-id
] |
summary
}
Display information about MPLS TE tunnel
interfaces.
display mpls te tunnel-interface
[
tunnel
number
]
Display information about PCEs discovered by
OSPF.
display ospf
[
process-id
] [
area
area-id
]
mpls te pce
[
originate-router
advertising-router-id
|
self-originate
]
Display link and node information in an OSPF
TEDB.
display
ospf
[
process-id
] [
area
area-id
]
mpls
te
advertisement
[
originate-router
advertising-router-id
|
self-originate
]
Display network information in an OSPF TEDB.
display
ospf
[
process-id
] [
area
area-id
]
mpls
te
network
[
originate-router
advertising-router-id
|
self-originate
]