276
lldp management-address-format string
Use
lldp management-address-format string
to configure the encoding format of the
management address as string.
Use
undo lldp management-address-format
to restore the default.
Syntax
In Layer 2 Ethernet interface view or management Ethernet interface view:
lldp
[
agent
{
nearest-customer
|
nearest-nontpmr
} ]
management-address-format string
undo lldp
[
agent
{
nearest-customer
|
nearest-nontpmr
} ]
management-address-format
In Layer 2 aggregate interface view:
lldp agent
{
nearest-customer
|
nearest-nontpmr
}
management-address-format string
undo lldp agent
{
nearest-customer
|
nearest-nontpmr
}
management-address-format
Default
The encoding format of the management address is numeric.
Views
Layer 2 aggregate interface view
Layer 2 Ethernet interface view
Management Ethernet interface view
Predefined user roles
network-admin
Parameters
agent
: Specifies an LLDP agent type. If no agent type is specified in Ethernet interface view, the
command configures the encoding format of the management address for nearest bridge agents.
nearest-bridge
: Specifies nearest bridge agents.
nearest-customer
: Specifies nearest customer bridge agents.
nearest-nontpmr
: Specifies nearest non-TPMR bridge agents.
Usage guidelines
LLDP neighbors must use the same encoding format for the management address.
Examples
# Configure the encoding format of the management address as string for the nearest customer
bridge agents on GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] lldp agent nearest-customer management-address-format
string
lldp max-credit
Use
lldp max-credit
to set the token bucket size for sending LLDP frames.
Use
undo lldp max-credit
to restore the default.
Syntax
lldp max-credit
credit-value
Summary of Contents for FlexNetwork 5130 HI series
Page 302: ...294 ...
