269
Field Description
•
System
description
TLV.
•
System
capabilities
TLV.
•
Management
address
TLV.
IEEE 802.1 extended TLV
IEEE 802.1 organizationally specific TLVs:
•
Port VLAN ID TLV.
•
Port and protocol VLAN ID TLV.
•
VLAN
name
TLV.
•
DCBX TLV. The switch does not support DCBX TLV.
•
EVB
TLV.
The switch does not support EVB TLV.
•
Management
VID
TLV..
IEEE 802.3 extended TLV
IEEE 802.3 organizationally specific TLVs:
•
MAC-Physic
TLV.
•
Power via MDI TLV.
•
Link
aggregation
TLV.
•
Maximum frame size TLV.
LLDP-MED extend TLV
LLDP-MED TLVs:
•
Capabilities
TLV.
•
Network
Policy
TLV.
•
Extended
Power-via-MDI
TLV.
•
Location
Identification
TLV.
•
Inventory
TLV.
Inventory TLV
Inventory TLVs:
•
Hardware
Revision
TLV.
•
Firmware
Revision
TLV.
•
Software
Revision
TLV.
•
Serial
Number
TLV.
•
Manufacturer
Name
TLV.
•
Model
name
TLV.
•
Asset
ID
TLV.
lldp admin-status
Use
lldp admin-status
to specify the LLDP operating mode.
Use
undo lldp admin-status
to restore the default.
Syntax
In Layer 2 Ethernet interface view or management Ethernet interface view:
lldp [ agent { nearest-customer
|
nearest-nontpmr
} ]
admin-status
{
disable
|
rx
|
tx
|
txrx
}
undo lldp
[
agent
{
nearest-customer
|
nearest-nontpmr
} ]
admin-status
In Layer 2 aggregate interface view:
lldp agent
{
nearest-customer
|
nearest-nontpmr
}
admin-status
{
disable
|
rx
|
tx
|
txrx
}
undo lldp agent
{
nearest-customer
|
nearest-nontpmr
}
admin-status
Default
The nearest bridge agent operates in
txrx
mode, and the nearest customer bridge agent and nearest
non-TPMR bridge agent operate in
disable
mode.
Summary of Contents for FlexNetwork 5130 HI series
Page 302: ...294 ...
