![HP FlexNetwork 5130 HI series Command Reference Manual Download Page 147](http://html.mh-extra.com/html/hp/flexnetwork-5130-hi-series/flexnetwork-5130-hi-series_command-reference-manual_165888147.webp)
139
Related commands
•
stp
edged-port
•
stp
root-protection
stp max-hops
Use
stp max-hops
to set the maximum number of hops for an MST region.
Use
undo stp max-hops
to restore the default.
Syntax
stp max-hops
hops
undo stp
max-hops
Default
The maximum number of hops for an MST region is 20.
Views
System view
Predefined user roles
network-admin
Parameters
hops
: Sets the maximum hops in the range of 1 to 40.
Examples
# Set the maximum hops of the MST region to 35.
<Sysname> system-view
[Sysname] stp max-hops 35
Related commands
display stp
stp mcheck
Use
stp mcheck
to perform the mCheck operation on a port.
Syntax
stp mcheck
Views
Layer 2 Ethernet interface view, Layer 2 aggregate interface view
Predefined user roles
network-admin
Usage guidelines
When a port on an MSTP, RSTP, or PVST device connects to an STP device and receives STP
BPDUs, the port automatically transits to the STP mode. However, the port cannot automatically
transit back to the original mode when the following conditions exist:
•
The peer STP device is shut down or removed.
•
The port cannot detect the change.
Summary of Contents for FlexNetwork 5130 HI series
Page 302: ...294 ...