HP FlexFabric 5950 Series Configuration Manual Download Page 76

Page: 76 / 487

•

Make sure that no trunk port exists both in a multicast VLAN and a sub-VLAN of the multicast
VLAN.

Configuration procedure

To configure a sub-VLAN-based multicast VLAN:

Step

Command

Remarks

Enter system view.

system-view

N/A

Configure a VLAN as a
multicast VLAN and enter its
view.

multicast-vlan

vlan-id

By default, a VLAN is not a
multicast VLAN.

Assign the specified VLANs
to the multicast VLAN as
sub-VLANs.

subvlan

vlan-list

By default, a multicast VLAN does
not have any sub-VLANs.

Configuring a port-based multicast VLAN

You can assign only Layer 2 Ethernet interfaces or Layer 2 aggregate interfaces to a multicast VLAN.

Configuration prerequisites

Before you configure a port-based multicast VLAN, complete the following tasks:

•

Create VLANs as required.

•

Enable IGMP snooping for the VLAN to be configured as the multicast VLAN.

•

Enable IGMP snooping for all the VLANs that contain the multicast receivers.

Configuring user port attributes

Step

Command

Remarks

Enter system view.

system-view

N/A

Enter interface view.

interface

interface-type

interface-number

N/A

Configure the link type of the
user port as hybrid.

port link-type hybrid

The default setting is

access

For more information about this
command, see

Layer 2—LAN

Switching Command Reference.

Specify the PVID of the
current user port as the
VLAN to which the user port
belongs.

port hybrid pvid vlan

vlan-id

By default, the PVID for a hybrid
port is VLAN 1.

For more information about this
command, see

Layer 2—LAN

Switching Command Reference.

Configure the current user
port to permit multicast VLAN
and to untag the packets.

port hybrid
vlan

vlan-id-list

untagged

By default, a hybrid port permits
only VLAN 1.

For more information about this
command, see

Layer 2—LAN

Switching Command Reference.

Summary of Contents for FlexFabric 5950 Series








































































































































































































































































































































































































































































































Search results

Summary of Contents for FlexFabric 5950 Series

Reviews:

Related manuals for FlexFabric 5950 Series

Brands by name

Popular brands

HP FlexFabric 5950 Series, Configuration Manual

Search results

Summary of Contents for FlexFabric 5950 Series

Reviews:

Related manuals for FlexFabric 5950 Series

Brands by name

Popular brands