44
Step Command
Remarks
4.
Specify the authentication
method for LAN users.
authentication lan-access
{
ldap-scheme
ldap-scheme-name
[
local
] [
none
] |
local
[
none
] |
none
|
radius-scheme
radius-scheme-name
[
local
] [
none
] }
By default, the default
authentication method is
used for LAN users.
The
none
keyword is not
supported in FIPS mode.
5.
Specify the authentication
method for login users.
authentication login
{
hwtacacs-scheme
hwtacacs-scheme-name
[
radius-scheme
radius-scheme-name
] [
local
] [
none
] |
ldap-scheme
ldap-scheme-name
[
local
]
[
none
] |
local
[
none
] |
none
|
radius-scheme
radius-scheme-name
[
hwtacacs-scheme
hwtacacs-scheme-name
] [
local
] [
none
] }
By default, the default
authentication method is
used for login users.
The
none
keyword is not
supported in FIPS mode.
6.
Specify the authentication
method for portal users.
authentication portal
{
ldap-scheme
ldap-scheme-name
[
local
] [
none
] |
local
[
none
] |
none
|
radius-scheme
radius-scheme-name
[
local
] [
none
] }
By default, the default
authentication method is
used for portal users.
The
none
keyword is not
supported in FIPS mode.
7.
Specify the authentication
method for obtaining a
temporary user role.
authentication super
{
hwtacacs-scheme
hwtacacs-scheme-name
|
radius-scheme
radius-scheme-name
} *
By default, the default
authentication method is
used for obtaining a
temporary user role.
Configuring authorization methods for an ISP domain
Configuration prerequisites
Before configuring authorization methods, complete the following tasks:
1.
Determine the access type or service type to be configured. With AAA, you can configure an
authorization scheme for each access type and service type.
2.
Determine whether to configure the default authorization method for all access types or service
types. The default authorization method applies to all access users. However, the method has a
lower priority than the authorization method that is specified for an access type or service type.
Configuration guidelines
When configuring authorization methods, follow these guidelines:
•
The device supports HWTACACS authorization but not LDAP authorization.
•
To use a RADIUS scheme as the authorization method, specify the same RADIUS scheme that is
configured as the authentication method for the ISP domain. If an invalid RADIUS scheme is
specified as the authorization method, RADIUS authentication and authorization fail.
Configuration procedure
To configure authorization methods for an ISP domain:
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter ISP domain view.
domain
isp-name
N/A
