HP FlexFabric 5700 series Security Configuration Manual Download Page 261

Page: 261 / 460

249

Make sure the certificate is within the validity period.

Configure the correct system time for the device.

If the problem persists, contact HP Support.

Failed to export certificates

Symptom

Certificates cannot be exported.

Analysis

•

The PKI domain does not have local certificates when you export all certificates in PKCS12 format.

•

The specified export path does not exist.

•

The specified export path is invalid.

•

The public key of the local certificate to be exported does not match the public key in the key pair
of the PKI domain.

•

The storage space of the device is full.

Solution

Obtain or request local certificates.

Use

mkdir

to create the required path.

Specify a correct export path.

Configure the correct key pair in the PKI domain.

Clear up the storage space of the device.

If the problem persists, contact HP Support.

Failed to set the storage path

Symptom

The storage path for certificates or CRLs cannot be set.

Analysis

•

The specified storage path does not exist.

•

The specified storage path is illegal.

•

The storage space of the device is full.

Solution

Use

mkdir

to create the path.

Specify a valid storage path for certificates or CRLs.

Clear up the storage space of the device.

If the problem persists, contact HP Support.

Summary of Contents for FlexFabric 5700 series













































































































































































































































































































































































































































































Search results

Summary of Contents for FlexFabric 5700 series

Reviews:

Related manuals for FlexFabric 5700 series

Brands by name

Popular brands

HP FlexFabric 5700 series, Security Configuration Manual

Search results

Summary of Contents for FlexFabric 5700 series

Reviews:

Related manuals for FlexFabric 5700 series

Brands by name

Popular brands