HP FlexFabric 12900 series Command Reference Manual Download Page 121

Page: 121 / 268

113

<Sysname> cd flash:/

copy

Use

copy

to copy a file.

Syntax

copy

fileurl-source fileurl-dest

Views

User view

Predefined user roles

network-admin

Parameters

fileurl

source

: Specifies the name or URL of the file to be copied. If the file resides on an FTP or TFTP server

rather than on the device, specify the URL of the file. Whether a URL is case sensitive depends on the

server.

fileurl

dest

: Specifies the name or URL of the destination file or directory. To copy the source file to an FTP

or TFTP server, specify a URL. If you specify a directory, the device copies the specified file to the directory

and saves it with its original file name. Whether a URL is case sensitive depends on the server.

Usage guidelines

You can use the

copy

command to perform the following operations:

•

Copy a local file and save it locally.

•

Copy a local file and save it to an IPv4 FTP or TFTP server.

•

Copy a file on an IPv4 FTP or TFTP server and save it locally.

To specify a file or directory, use the following guidelines:

Location Name

format

Remarks

On the device

Use the file name guidelines in

Fundamentals Configuration Guide

N/A

On an FTP server

Enter the URL in the format ftp://

FTP

username

password

server

address

port number

file path

[/file

name

The username and password must be the same as

those configured on the FTP server. If the server
authenticates users only by the username, you are

not required to enter the password.
For example, to use the username 1 and password

1 and specify the startup.cfg file in the authorized
working directory on FTP server 1.1.1.1, enter the

URL ftp://1:[email protected]/startup.cfg.

On a TFTP server

Enter the URL in the format
tftp://

server address

port

number

file path

[/file

name

For example, to specify the startup.cfg file in the
working directory on TFTP server 1.1.1.1, enter

the URL tftp://1.1.1.1/startup.cfg.

Examples

# Copy the

test.cfg

file in the current folder and save it to the current folder as

testbackup.cfg

<Sysname> copy test.cfg testbackup.cfg

Copy flash:/test.cfg to flash:/testbackup.cfg?[Y/N]:y

Summary of Contents for FlexFabric 12900 series













































































































































































































































































Search results

Summary of Contents for FlexFabric 12900 series

Reviews:

Related manuals for FlexFabric 12900 series

Brands by name

Popular brands

HP FlexFabric 12900 series, Command Reference Manual

Search results

Summary of Contents for FlexFabric 12900 series

Reviews:

Related manuals for FlexFabric 12900 series

Brands by name

Popular brands