HP ENVY x360 13 Maintenance And Service Manual Download Page 46

Page: 46 / 93

Fan

Table 5-5

Fan spare part information

Description

Spare part number

Fan (includes cable)

L94511-001

Before removing the fan, follow these steps:

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.

Disconnect all external devices connected to the computer.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.

Remove the bottom cover (see

Bottom cover on page 30

Remove the fan:

Disconnect the battery cable from the system board.

Disconnect the fan cable (1) from the system board.

Remove the cover (2) that secures the WLAN antenna cables to the WLAN module.

The WLAN module cover is available using spare part number L98315-005.

Remove the two Phillips M2.0×4.0 screws (3) that secure the fan to the system board.

Chapter 5 Removal and replacement procedures

Summary of Contents for ENVY x360 13






























































































Search results

Summary of Contents for ENVY x360 13

Reviews:

Related manuals for ENVY x360 13

Brands by name

Popular brands

HP ENVY x360 13, Maintenance And Service Manual

Search results

Summary of Contents for ENVY x360 13

Reviews:

Related manuals for ENVY x360 13

Brands by name

Popular brands