HP ENVY x2 Maintenance And Service Manual Download

Page: 55 / 79

Power button board

Description

Spare part number

Power button board (includes cable)

L05098-001

Before removing the power button board, follow these steps:

Shut down the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.

Disconnect all external devices connected to the tablet.

Disconnect the power from the tablet by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the tablet.

Remove the display panel assembly (see

Display panel assembly on page 32

), and then remove

the following components:

▲

Battery (see

Battery on page 36

)

Remove the power button board:

Release the power button board cable from the ZIF connector on the system board (1), and then remove
the power button board (2).

Remove the power button board and cable.

Reverse this procedure to install the power button board.

Component replacement procedures

Summary of Contents for ENVY x2
















































































Search results

Summary of Contents for ENVY x2

Reviews:

Related manuals for ENVY x2

Brands by name

Popular brands

HP ENVY x2, Maintenance And Service Manual

Search results

Summary of Contents for ENVY x2

Reviews:

Related manuals for ENVY x2

Brands by name

Popular brands