Reverse this procedure to install the USB/audio board.
Speakers
Description
Spare part number
Speakers (includes left and right speakers and cable)
809316-001
Before removing the speakers, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the optical drive (see
6.
Remove the bottom cover (see
).
7.
Remove the system board (see
Remove the speakers:
1.
Release the speaker cable from the clip built into the keyboard/top cover (1).
2.
Remove the display cable (2) from the channel (3) at the top of the left speaker.
3.
Remove the two Phillips screws (4)
4.
Remove the speakers (5).
HP Confidential
Component replacement procedures
47
Summary of Contents for Envy 17 Series
Page 4: ...HP Confidential iv Safety warning notice ...
Page 8: ...viii ...