Hard drive
NOTE:
The hard drive spare part kit does not include the hard drive brackets or the hard drive cable.
The hard drive brackets and the hard drive cable are included in the Hard Drive Hardware Kit, spare part
number 809296-001.
Description
Spare part number
For use only on computer models with model numbers 17-s100 through 17-s199:
1-TB, 7200-rpm, SATA, 9.5-mm
766644-005
For use on all computer models:
2-TB, 5400-rpm, SATA, 9.5-mm
801808-005
1-TB, 5400-rpm, SATA, 9.5-mm
778192-005
1-TB, 5400-rpm, 8-GB hybrid, 7.0-mm
731999-005
Before removing the hard drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the optical drive (see
6.
Remove the bottom cover (see
).
Remove the hard drive:
1.
Release the zero insertion force (ZIF) connector (1) to which the hard drive cable is connected, and then
disconnect the hard drive cable from the system board.
HP Confidential
Component replacement procedures
31
Summary of Contents for Envy 17 Series
Page 4: ...HP Confidential iv Safety warning notice ...
Page 8: ...viii ...