7.
To install an M.2 SSD, slide the connector end of the SSD into the system board connector (1), press the
other end of the SSD down (2), and then secure the SSD to the system board with the screw (3).
8.
Replace the fan by pressing it down onto the system board posts.
9.
Replace the base unit front and rear access panels. See
Removing and replacing the base unit access
.
10.
Reconnect the power cord and any external devices, and then turn on the computer.
Replacing or installing a webcam
To replace a webcam:
1.
Remove all removable media, such as USB flash drives, from the computer.
2.
Turn off the computer properly through the operating system, and turn off any external devices.
3.
Disconnect the power cord from the AC outlet and disconnect any external devices.
24
Chapter 3 Hardware repair and upgrade
