manualshive.com logo in svg

HP EliteDesk 800 G3, Maintenance And Service Manual

The HP EliteDesk 800 G3 offers high performance and versatility. To assist with any disassembly or repairs, you can easily access the comprehensive Disassembly Instructions Manual. This informative manual is available for free download on our website, ensuring proper maintenance and maximum productivity for your EliteDesk 800 G3.

Share
Download
background image

Computer Setup—UEFI Drivers

Lets you restart the computer into the 3rd Party Option ROM Management application. You can start this 
application directly by pressing 

F3

 during startup.

Recovering the Configuration Settings

This method of recovery requires that you first perform the Save to Removable Media command with the 
Computer Setup (F10) Utility before Restore is needed. (See 

Computer Setup–Main on page 77

 in the 

Computer Setup—File table.)

The Save to Removable Media option creates a file named HPSETUP.TXT on an inserted USB flash media 
device. This file can be edited to change the settings on Restore. An asterisk (*) marks the selected option for 
a setting.

NOTE:

It is recommended that you save any modified computer configuration settings to a USB flash media 

device and save the device for possible future use.

To restore the configuration, insert the USB flash media device with the saved configuration and perform the 
Restore from Removable Media command with the Computer Setup (F10) Utility. (See 

Computer Setup–Main 

on page 77

 in the Computer Setup—File table.)

86

Chapter 5   Computer Setup (F10) Utility

Summary of Contents for EliteDesk 800 G3






































































































































































Reviews:

No comments

Related manuals for EliteDesk 800 G3

Intel NUC Kit D34010WYKH User Manual preview
NUC Kit D34010WYKH
Brand: Intel Pages: 12

Brands by name

Popular brands

Load more brands