Antennas
The antennas route from the WLAN module to the front and the rear of the computer.
To replace the antennas:
1.
Prepare the computer for disassembly (
Preparation for disassembly on page 19
2.
Remove the access panel (
).
3.
Remove the drive cage (
4.
From the front of the computer, remove the Torx T15 screw that secures the antenna to the computer.
NOTE:
Chassis color may vary.
68
Chapter 4 Removal and replacement procedures – Microtower (MT) chassis
Summary of Contents for EliteDesk 800 G3
Page 4: ...iv Safety warning notice ...
Page 9: ...Appendix D Specifications 151 TWR Specifications 151 Index 153 ix ...
Page 10: ...x ...
Page 39: ...Drive cage 29 ...