manualshive.com logo in svg

HP EliteDesk 800 G3, Maintenance And Service Manual

The HP EliteDesk 800 G3 offers high performance and versatility. To assist with any disassembly or repairs, you can easily access the comprehensive Disassembly Instructions Manual. This informative manual is available for free download on our website, ensuring proper maintenance and maximum productivity for your EliteDesk 800 G3.

Share
Download
background image

Speaker

The speaker is attached to the front of the chassis. Remove it from the inside of the chassis.

1.

Prepare the computer for disassembly (

Preparation for disassembly on page 19

).

2.

Remove the access panel (

Access panel on page 20

).

3.

Remove the drive cage (

Drive cage on page 28

).

4.

Disconnect the speaker cable from the system board connector labeled SPKR (1).

5.

Remove the Torx T15 screw (2) that secures the speaker to the chassis.

6.

Slide the speaker to the right, and the remove the speaker from the chassis (3).

To replace the speaker, reverse the removal procedures.

60

Chapter 4   Removal and replacement procedures – Microtower (MT) chassis

Summary of Contents for EliteDesk 800 G3






































































































































































Reviews:

No comments

Related manuals for EliteDesk 800 G3

Brands by name

Popular brands

Load more brands