Installing and removing drives
Removing a 5.25-inch drive
CAUTION:
All removable media should be taken out of a drive before removing the drive from the computer.
1.
Prepare the computer for disassembly (
Preparation for disassembly on page 19
2.
Remove the access panel (
)
3.
Remove the front bezel (
4.
Disconnect the power cable (1) and data cable (2) from the rear of the drive.
IMPORTANT:
When removing the cables, pull the tab or connector instead of the cable itself to avoid
damaging the cable.
5.
Push the green drivelock mechanism towards the optical drive (1), and then slide the drive from the
drive bay (2).
38
Chapter 4 Removal and replacement procedures – Microtower (MT) chassis
Summary of Contents for EliteDesk 800 G3
Page 4: ...iv Safety warning notice ...
Page 9: ...Appendix D Specifications 151 TWR Specifications 151 Index 153 ix ...
Page 10: ...x ...
Page 39: ...Drive cage 29 ...