manualshive.com logo in svg

HP EliteDesk 800 G3, Maintenance And Service Manual

The HP EliteDesk 800 G3 offers high performance and versatility. To assist with any disassembly or repairs, you can easily access the comprehensive Disassembly Instructions Manual. This informative manual is available for free download on our website, ensuring proper maintenance and maximum productivity for your EliteDesk 800 G3.

Share
Download
background image

Using Windows 7 operating system media

If you cannot use the recovery media you previously created using the HP Recovery Disc Creator (select 
products only), you must purchase a Windows 7 operating system DVD to reboot the computer and repair the 
operating system.

To order a Windows 7 operating system DVD, go to the HP website. For U.S. support, go to 

http://www.hp.com/support

. For worldwide support, go to 

http://welcome.hp.com/country/us/en/

wwcontact_us.html

. You can also order the DVD by calling support. For contact information, see the 

Worldwide Telephone Numbers booklet included with the computer.

CAUTION:

Using a Windows 7 operating system DVD completely erases hard drive contents and reformats 

the hard drive. All files that you have created and any software that you have installed on the computer are 
permanently removed. When reformatting is complete, the recovery process helps you restore the operating 
system, as well as drivers, software, and utilities.

To initiate recovery using a Windows 7 operating system DVD:

NOTE:

This process takes several minutes.

1.

If possible, back up all personal files.

2.

Restart the computer, and then insert the Windows 7 operating system DVD into the optical drive before 
the Windows operating system loads.

3.

When prompted, press any keyboard key.

4.

Follow the on-screen instructions.

5.

Click Next.

6.

Select Repair your computer.

7.

Follow the on-screen instructions.

After the repair is completed:

1.

Eject the Windows 7 operating system DVD and then insert the Driver Recovery DVD.

2.

Install the Hardware Enabling Drivers first, and then install Recommended Applications.

Backing up, restoring, and recovering in Windows 7 139

Summary of Contents for EliteDesk 800 G3






































































































































































Reviews:

No comments

Related manuals for EliteDesk 800 G3

Brands by name

Popular brands

Load more brands