manualshive.com logo in svg

HP EliteDesk 800 G3, Maintenance And Service Manual

The HP EliteDesk 800 G3 offers high performance and versatility. To assist with any disassembly or repairs, you can easily access the comprehensive Disassembly Instructions Manual. This informative manual is available for free download on our website, ensuring proper maintenance and maximum productivity for your EliteDesk 800 G3.

Share
Download
background image

Removing the HP Recovery partition (select products only)

HP Recovery Manager software allows you to remove the HP Recovery partition to free up hard drive space.

IMPORTANT:

After you remove the HP Recovery partition, you will not be able to perform System Recovery 

or create HP recovery media from the HP Recovery partition. So before you remove the Recovery partition, 
create HP Recovery media; see 

Creating HP Recovery media (select products only) on page 130

.

NOTE:

The Remove Recovery Partition option is only available on products that support this function.

Follow these steps to remove the HP Recovery partition:

1.

Type 

recovery

 in the taskbar search box, and then select HP Recovery Manager.

2.

Select Remove Recovery Partition, and then follow the on-screen instructions.

Backing up, restoring, and recovering in Windows 7

Your computer includes HP and Windows tools to help you safeguard your information and retrieve it if you 
ever need to. These tools will help you return your computer to a proper working state, all with simple steps. 
This section provides information about the following processes:

●

Creating recovery media and backups

●

Restoring and recovering your system

Creating recovery media and backups

Recovery after a system failure is only as good as your most recent backup.

1.

After you successfully set up the computer, create HP Recovery media. This step creates a Windows 7 
operating system DVD and a Driver Recovery DVD. The Windows DVD can be used to reinstall the original 
operating system in cases where the hard drive is corrupted or has been replaced. The Driver Recovery 
DVD installs specific drivers and applications. See 

Creating recovery media with HP Recovery Disc 

Creator on page 136

.

2.

Use Windows Backup and Recovery tools to perform the following:

●

Back up individual files and folders

●

Back up your entire hard drive (select products only)

●

Create system repair discs (select products only) with the installed optical drive (select products 
only) or an optional external optical drive

●

Create system restore points

NOTE:

This guide describes an overview of backing up, restoring, and recovering options. For more details 

about the tools provided, see Help and Support. To access Help and Support, select Start, and then select 
Help and Support.

NOTE:

HP recommends that you print the recovery procedures and save them for later use, in case of 

system instability.

In case of system failure, you can use the backup files to restore the contents of your computer. See 

Backing 

up your information on page 136

.

Backing up, restoring, and recovering in Windows 7 135

Summary of Contents for EliteDesk 800 G3






































































































































































Reviews:

No comments

Related manuals for EliteDesk 800 G3

Asus E420 User Manual preview
E420
Brand: Asus Pages: 44

Brands by name

Popular brands

Load more brands