manualshive.com logo in svg

HP EliteDesk 800 G3, Maintenance And Service Manual

The HP EliteDesk 800 G3 offers high performance and versatility. To assist with any disassembly or repairs, you can easily access the comprehensive Disassembly Instructions Manual. This informative manual is available for free download on our website, ensuring proper maintenance and maximum productivity for your EliteDesk 800 G3.

Share
Download
background image

Front panel components

Drive configuration may vary by model. Some models have a bezel blank covering one or more drive bays.

Front panel components

 

 

1

5.25-inch half-height drive bay (behind bezel)

7

Audio-out (headphone) jack

2

Slim optical drive (optional)

8

USB 2.0 port with HP Sleep and Charge

3

SD card reader (optional)

9

USB 2.0 port

4

Power button

10

USB 3.x ports (2)

5

Hard drive activity light

11

USB Type-C charging port

6

Audio-out (headphone)/Audio-in (microphone) combo 
jack

 

 

NOTE:

The light on the power button is normally white when the power is on. If it is flashing red, there is a problem with 

the computer and it is displaying a diagnostic code. Refer to the Maintenance and Service Guide to interpret the code.

2

Chapter 1   Product features

Summary of Contents for EliteDesk 800 G3






































































































































































Reviews:

No comments

Related manuals for EliteDesk 800 G3

Asus VivoMini UN65 User Manual preview
VivoMini UN65
Brand: Asus Pages: 76
Asus VivoPC VC62B User Manual preview
VivoPC VC62B
Brand: Asus Pages: 50

Brands by name

Popular brands

Load more brands