manualshive.com logo in svg

HP EliteDesk 800 G3, Maintenance And Service Manual

The HP EliteDesk 800 G3 offers high performance and versatility. To assist with any disassembly or repairs, you can easily access the comprehensive Disassembly Instructions Manual. This informative manual is available for free download on our website, ensuring proper maintenance and maximum productivity for your EliteDesk 800 G3.

Share
Download
background image

Fuzzy focus; streaking, ghosting, or shadowing effects; horizontal scrolling lines; faint vertical bars; or unable to center the 
picture on the screen (flat panel monitors using an analog VGA input connection only).

Cause

Solution

with the synchronization, go to the following Web site, 
select the appropriate monitor, and download either 
SP32347 or SP32202: 

http://www.hp.com/support

Graphics card is not seated properly or is bad (some models).

1.

Reseat the graphics card.

2.

Replace the graphics card.

Certain typed symbols do not appear correct.

Cause

Solution

The font you are using does not support that particular symbol.

Use the Character Map to locate and select the appropriate 
symbol. You can copy the symbol from the Character Map into a 
document.

In Windows 7, click Start, select All Programs, select Accessories, 
select System Tools, and then select Character Map.

In Windows 10, type 

ch

 in the taskbar search box, and then select 

Character Map from the list of applications.

Solving audio problems

If the computer has audio features and you encounter audio problems, see the common causes and solutions 
listed in the following table.

Headset microphone connected to the front is not working or is very quiet.

Cause

Solution

The front Headset connector supports CTIA (Cellular Telephone 
Industries Association) style headsets and not OMTP (Open Mobile 
Terminal Platform) style headsets. These differ by the 
microphone connections.

Make sure that a CTIA style headset is being used or use an OMTP 
style headset with a commercially available adapter that converts 
an OMTP headset to the CTIA pinout.

Sound cuts in and out.

Cause

Solution

Processor resources are being used by other open applications.

Shut down all open processor-intensive applications.

Sound does not come out of the speaker or headphones.

Cause

Solution

Software volume control is turned down or muted.

Double-click the Speaker icon on the taskbar, then make sure 
that Mute is not selected and use the volume slider to adjust the 
volume.

Solving audio problems 101

Summary of Contents for EliteDesk 800 G3






































































































































































Reviews:

No comments

Related manuals for EliteDesk 800 G3

Brands by name

Popular brands

Load more brands