HP EliteBook x360 1030 Maintenance And Service Manual Download Page 24

Page: 24 / 102

Table 2-10

Top cover component and its description

Component

Description

Internal microphones (2)

Record sound.

Rear

Use the illustration and table to identify the rear components.

Table 2-11

Rear component and its description

Component

Description

Vent

Enables airflow to cool internal components.

NOTE:

The computer fan starts up automatically to

cool internal components and prevent overheating. It is
normal for the internal fan to cycle on and off during
routine operation.

Labels

Use the illustration and table to identify the label location and components.

The labels affixed to the computer provide information you might need when you troubleshoot system problems
or travel internationally with the computer. Labels might be in paper form or imprinted on the product.

Chapter 2 Components

ENWW

Summary of Contents for EliteBook x360 1030







































































































Search results

Summary of Contents for EliteBook x360 1030

Reviews:

Related manuals for EliteBook x360 1030

Brands by name

Popular brands

HP EliteBook x360 1030, Maintenance And Service Manual

Search results

Summary of Contents for EliteBook x360 1030

Reviews:

Related manuals for EliteBook x360 1030

Brands by name

Popular brands