HP EliteBook Folio 1030 G1, Maintenance And Service Manual

Page: 56 / 96

System board
NOTE: The system board spare part kit includes replacement thermal material.
All system boards use the following part numbers:
xxxxxx-001: Windows 7 or non-Windows operating systems
xxxxxx-601: Windows 10 operating system
Description Spare part number
System board equipped with Intel Core M7-6Y75 processor 842326-xxx
System board equipped with Intel Core M5-6Y57 processor 842328-xxx
System board equipped with 8 GB of system memory and an Intel Core M5-6Y57 processor 842327-xxx
System board equipped with 8 GB of system memory and an Intel Core M5-6Y54 processor 842325-xxx
Plastics Kit (includes system board clip) 860705-001
Before removing the system board, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see Bottom cover on page 24 ).
5. Remove the battery (see Battery on page 43 ).
6. When replacing the system board, be sure that the following components are removed from the
defective system board and installed on the replacement system board:
● Solid-state drive (see Solid-state drive on page 31 )
● WLAN module (see WLAN module on page 33 )
● Heat sink (see Heat sink on page 41 )
Remove the system board:
1. Disconnect the following cables:
(1): Display panel
(2): Speaker
(3): Keyboard (backlight)
(4): Wireless antennas
(5): Keyboard (primary)
(6): Webcam
(7): Fingerprint reader
(8): NFC module
(9): ForcePad
48 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts