Reverse this procedure to install the touchpad.
NFC module
To remove the NFC module, use this procedure and illustration.
Table 6-8
NFC module description and part number
Description
Spare part number
NFC module
M07214-001
NFC module cable (included in Cable Kit)
M05255-001
Before removing the NFC module, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly on page 32
).
2.
Remove the bottom cover (
3.
Remove the battery (see
Remove the NFC module:
1.
Disconnect the system board cable from the ZIF connector on the NFC module (1).
2.
Disconnect the touchpad cable from the reverse ZIF connector on the NFC module (2).
3.
Use a tool to release the module (3), and then remove the module from the computer (4). The module is
secured with adhesive.
Reverse this procedure to install the NFC module.
Fan
To remove the fan, use this procedure and illustration.
Component replacement procedures
49
