HP EliteBook 850 G7 Maintenance And Service Manual Download

Page: 56 / 109

Remove the board from the computer (4).

Reverse this procedure to install the USB board.

Fingerprint reader board

To remove the fingerprint reader board, use this procedure and illustration.

Table 6-6

Fingerprint reader board description and part number

Description

Spare part number

Fingerprint reader board

M07206-001

Fingerprint reader board cable (included in Cable Kit)

M05255-001

Fingerprint reader board bracket (included in Bracket Kit)

M05264-001

Before removing the fingerprint reader board, follow these steps:

Prepare the computer for disassembly (

Preparation for disassembly on page 32

Remove the bottom cover (

Bottom cover on page 32

Disconnect the battery cable from the system board (see

Battery on page 41

Remove the solid-state drive to the left of the battery (

Solid-state drive on page 40

Remove the fingerprint reader board:

Remove the Phillips M2.0 × 2.0 screw (1) that secures the fingerprint reader bracket to the computer,
and then remove the bracket (2).

Disconnect the cable from the ZIF connector on the fingerprint reader board (3).

Chapter 6 Removal and replacement procedures for authorized service provider parts

Summary of Contents for EliteBook 850 G7














































































































Search results

Summary of Contents for EliteBook 850 G7

Reviews:

Related manuals for EliteBook 850 G7

Brands by name

Popular brands

HP EliteBook 850 G7, Maintenance And Service Manual

Search results

Summary of Contents for EliteBook 850 G7

Reviews:

Related manuals for EliteBook 850 G7

Brands by name

Popular brands