HP EliteBook 845 Maintenance And Service Manual Download Page 80

Page: 80 / 117

Remove the card reader cable (3) from the computer.

To install the card reader cable, reverse the removal procedure.

Card reader

To remove the card reader, use this procedure and illustration.

Table 5-14

Card reader description and part number

Description

Spare part number

Card reader

NOTE:

The card reader spare part kit does not include the card reader cable. The card reader cable is included

in the Cable Kit, spare part number N18760-001.

N02323-001

Before removing the card reader, follow these steps:

Prepare the computer for disassembly (see

Preparation for disassembly on page 39

Remove the bottom cover (see

Bottom cover on page 39

Remove the battery (see

Battery on page 41

Remove the left speaker (see

Speakers on page 49

Remove the card reader cable (see

Card reader cable on page 73

Remove the card reader:

Remove the three Phillips M2.0 × 2.5 broad head screws (1) that secure the card reader to the computer.

Chapter 5 Removal and replacement procedures for authorized service provider parts

Summary of Contents for EliteBook 845






















































































































Search results

Summary of Contents for EliteBook 845

Reviews:

Related manuals for EliteBook 845

Brands by name

Popular brands

HP EliteBook 845, Maintenance And Service Manual

Search results

Summary of Contents for EliteBook 845

Reviews:

Related manuals for EliteBook 845

Brands by name

Popular brands