HP EliteBook 845 Maintenance And Service Manual Download Page 57

Page: 57 / 117

Remove the connector board cable (3) from the computer.

To install the connector board cable, reverse the removal procedure.

Audio jack cable

To remove the audio jack cable, use this procedure and illustration.

NOTE:

The audio jack cable is included in the Cable Kit, spare part number N18760-001.

Before removing the audio jack cable, follow these steps:

Prepare the computer for disassembly (see

Preparation for disassembly on page 39

Remove the bottom cover (see

Bottom cover on page 39

Disconnect the battery cable from the system board (see

Battery on page 41

Remove the audio jack cable:

Release the ZIF connector (1) to which the audio jack cable is connected, and then disconnect the cable from

the system board.

Remove the Phillips M2.0 × 4.7 screw (2) that secures the audio jack to the computer.

Audio jack cable

Summary of Contents for EliteBook 845






















































































































Search results

Summary of Contents for EliteBook 845

Reviews:

Related manuals for EliteBook 845

Brands by name

Popular brands

HP EliteBook 845, Maintenance And Service Manual

Search results

Summary of Contents for EliteBook 845

Reviews:

Related manuals for EliteBook 845

Brands by name

Popular brands