manualshive.com logo in svg

HP EliteBook 845 G7, Maintenance And Service Manual, Page: 56 / 108

Share
Download
HP EliteBook 845 G7 Maintenance And Service Manual Download Page 56

2.

Use a tool (2) to release the battery from the computer (3).

Reverse this procedure to install the RTC battery.

Speakers

To remove the speakers, use this procedure and illustration.

Table 6-3

  Speaker description and part number

Description

Spare part number

Speaker Kit

M07107-001

Before removing the speakers, follow these steps:

1.

Prepare the computer for disassembly (

Preparation for disassembly on page 33

).

2.

Remove the bottom cover (

Bottom cover on page 33

).

3.

Disconnect the battery cable from the system board (see 

Battery on page 43

).

Remove the speakers:

1.

Disconnect the speaker cable from the system board (1).

2.

Remove the cable between the speakers from the clips along the bottom of the battery (2).

46

Chapter 6   Removal and replacement procedures for authorized service provider parts

Summary of Contents for EliteBook 845 G7













































































































Reviews:

No comments