HP ELITEBOOK 840 G4 Maintenance And Service Manual Download

Page: 69 / 116

Smart card reader board

Description

Spare part number

Smart card reader board

914380-001

Smart card reader cable (available in Cable Kit)

914381-001 (Cable Kit)

Before removing the card reader board, follow these steps:

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.

Disconnect all external devices connected to the computer.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.

Remove the bottom cover (see

Bottom cover on page 32

Remove the battery (see

Battery on page 36

Remove the keyboard (see

Keyboard on page 47

Remove the internal base plate (see

Internal base plate on page 50

Remove the smart card reader board:

NOTE:

Before you remove the smart card reader, make sure nothing (memory card or plastic insert) in

inserted in the reader.

Disconnect the main system board cable from the card reader board (1).

Disconnect the cable from the top of the NFC board (2).

Disconnect the touchpad cable from the side of the card reader board (3).

Disconnect the cable from the bottom of the NFC board (4).

Component replacement procedures

Summary of Contents for ELITEBOOK 840 G4





















































































































Search results

Summary of Contents for ELITEBOOK 840 G4

Reviews:

Related manuals for ELITEBOOK 840 G4

Brands by name

Popular brands

HP ELITEBOOK 840 G4, Maintenance And Service Manual

Search results

Summary of Contents for ELITEBOOK 840 G4

Reviews:

Related manuals for ELITEBOOK 840 G4

Brands by name

Popular brands