HP EliteBook 835 G8 Maintenance And Service Manual Download

Page: 57 / 111

Remove the board from the computer (3).

Reverse this procedure to install the card reader board.

Power connector cable

To remove the power connector cable, use this procedure and illustration.

Table 6-5

Power connector cable description and part number

Description

Spare part number

Power connector cable

M15626-001

Before removing the power connector cable, follow these steps:

Prepare the computer for disassembly (see

Preparation for disassembly on page 32

Remove the bottom cover (see

Bottom cover on page 32

Disconnect the battery cable from the system board (see

Battery on page 42

Remove the power connector cable:

Disconnect the cable from the system board (1), and then remove the cable from the clip.

Remove the Phillips M2.0 × 4.0 screw (2) that secures the power connector cable to the computer.

Component replacement procedures

Summary of Contents for EliteBook 835 G8
















































































































Search results

Summary of Contents for EliteBook 835 G8

Reviews:

Related manuals for EliteBook 835 G8

Brands by name

Popular brands

HP EliteBook 835 G8, Maintenance And Service Manual

Search results

Summary of Contents for EliteBook 835 G8

Reviews:

Related manuals for EliteBook 835 G8

Brands by name

Popular brands