HP EliteBook 835 G8 Maintenance And Service Manual Download

Page: 33 / 111

Cable Kit

To identify the contents of the Cable Kit, use this table.

Table 3-3

Cable Kit content descriptions and part number

Component

Spare part number

Cable Kit, includes:

M08526-001

Hub board to system board cable

Third microphone board to hub board cable

IR camera to hub board cable

Ambient light sensor to hub board cable

Ambient light sensor to hub board cable (privacy models with WWAN)

Ambient light sensor to display panel (privacy models with WWAN)

Dual ambient light sensor to hub board cable

Dual ambient light sensor to display panel cable

Touchpad cable

Fingerprint reader board cable

Smart card reader to system board cable

NFC module to system board cable

USB board to system board cable

Camera/microphone module to hub board cable

Bracket Kit

To identify the Bracket Kit components, use this illustration and table.

Cable Kit

Summary of Contents for EliteBook 835 G8
















































































































Search results

Summary of Contents for EliteBook 835 G8

Reviews:

Related manuals for EliteBook 835 G8

Brands by name

Popular brands

HP EliteBook 835 G8, Maintenance And Service Manual

Search results

Summary of Contents for EliteBook 835 G8

Reviews:

Related manuals for EliteBook 835 G8

Brands by name

Popular brands