HP EliteBook 630 Maintenance And Service Manual Download

Page: 86 / 103

Downloading HP PC Hardware Diagnostics UEFI by product name or number (select products only)

You can download HP PC Hardware Diagnostics UEFI by product name or number (select products only) to a

USB flash drive.

NOTE:

For some products, you might have to download the software to a USB flash drive by using the

product name or number.

Go to

http://www.hp.com/support

Enter the product name or number, select your computer, and then select your operating system.

In the Diagnostics section, follow the on-screen instructions to select and download the specific UEFI

Diagnostics version for your computer.

Using Remote HP PC Hardware Diagnostics UEFI settings (select

products only)

Remote HP PC Hardware Diagnostics UEFI is a firmware (BIOS) feature that downloads HP PC Hardware

Diagnostics UEFI to your computer. It can then execute the diagnostics on your computer, and it might upload

results to a preconfigured server.

For more information about Remote HP PC Hardware Diagnostics UEFI, go to

http://www.hp.com/go/techcenter/pcdiags

, and then select Find out more.

Downloading Remote HP PC Hardware Diagnostics UEFI

HP Remote PC Hardware Diagnostics UEFI is also available as a SoftPaq that you can download to a server.

Downloading the latest Remote HP PC Hardware Diagnostics UEFI version

You can download the latest HP PC Hardware Diagnostics UEFI version to a USB flash drive.

Go to

http://www.hp.com/go/techcenter/pcdiags

. The HP PC Diagnostics home page is displayed.

Select Download Remote Diagnostics, and then select Run.

Downloading Remote HP PC Hardware Diagnostics UEFI by product name or number

You can download HP Remote PC Hardware Diagnostics UEFI by product name or number.

NOTE:

For some products, you might have to download the software by using the product name or

number.

Go to

http://www.hp.com/support

Select Software and Drivers, select your type of product, enter the product name or number in the search

box that is displayed, select your computer, and then select your operating system.

In the Diagnostics section, follow the on-screen instructions to select and download the Remote UEFI

version for the product.

Customizing Remote HP PC Hardware Diagnostics UEFI settings

Using the Remote HP PC Hardware Diagnostics setting in Computer Setup (BIOS), you can perform several

customizations.

Chapter 9 Using HP PC Hardware Diagnostics

Summary of Contents for EliteBook 630








































































































Search results

Summary of Contents for EliteBook 630

Reviews:

Related manuals for EliteBook 630

Brands by name

Popular brands

HP EliteBook 630, Maintenance And Service Manual

Search results

Summary of Contents for EliteBook 630

Reviews:

Related manuals for EliteBook 630

Brands by name

Popular brands