HP Elite x2 1013 G3 Maintenance And Service Manual Download Page 51

Page: 51 / 107

POGO connector

Description

Spare part number

POGO connector and cable

L31359-001

Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.

Disconnect the power from the computer by unplugging the power cord from the computer.

Disconnect all external devices from the computer.

Remove the following components:

Display panel (see

Display panel on page 33

)

Battery (see

Battery on page 36

)

Remove the POGO connector:

Using a PH Type #0 Phillips screwdriver, remove the two Phillips M1.6×1.6 screws (1).

IMPORTANT:

Be sure to use the correct size screwdriver to avoid stripping the screw.

Disconnect the POGO cable from the ZIF connector on the system board (2).

Peel the cable up to disengage the adhesive that secures it to the computer (3), and then remove the
cable/connector from the computer (4).

Reverse this procedure to replace the POGO connector.

Component replacement procedures

Summary of Contents for Elite x2 1013 G3












































































































Search results

Summary of Contents for Elite x2 1013 G3

Reviews:

Related manuals for Elite x2 1013 G3

Brands by name

Popular brands

HP Elite x2 1013 G3, Maintenance And Service Manual

Search results

Summary of Contents for Elite x2 1013 G3

Reviews:

Related manuals for Elite x2 1013 G3

Brands by name

Popular brands