HP Elite Dragonfly Page 52 Maintenance And Service Manual Download

Page: 52 / 84

Table 5-12

Power button board description and part number

Description

Spare part number

Power button board (includes cable)

M45175-001

Before removing the power button board, follow these steps:

Prepare the computer for disassembly (

Preparation for disassembly on page 29

Remove the bottom cover (

Bottom cover on page 29

Disconnect the battery cable from the system board (see

Battery on page 30

Remove the power button board:

▲

Disconnect the power button board cable from the ZIF connector on the USB board (1), and then lift the
power button board and plastic support piece from the slot on the side of the computer (2).

Reverse this procedure to install the power button board.

System board

To remove the system board, use these procedures and illustrations.

Table 5-13

System board descriptions and part numbers

Description

Spare part number

System board (includes integrated processor)

All system boards use the following part numbers:

xxxxxx-001: Non-Windows operating systems

xxxxxx-601: Windows operating system

Chapter 5 Removal and replacement procedures for authorized service provider parts

Summary of Contents for Elite Dragonfly





















































































Search results

Summary of Contents for Elite Dragonfly

Reviews:

Related manuals for Elite Dragonfly

Brands by name

Popular brands

HP Elite Dragonfly, Maintenance And Service Manual

Search results

Summary of Contents for Elite Dragonfly

Reviews:

Related manuals for Elite Dragonfly

Brands by name

Popular brands