HP Elite c645 G2 Chromebook Maintenance And Service Manual Download

Page: 75 / 81

b. Select the Security menu, select Secure Boot Configuration, and then follow the on-screen

instructions.

c. At the Secure Boot Configuration window, select Secure Boot, select Clear Secure Boot Keys, and then

follow the on-screen instructions to continue.

Using HP Sure Start (select products only)

Select computer models are configured with HP Sure Start, a technology that continuously monitors your

computer's BIOS for attacks or corruption.

If the BIOS becomes corrupted or is attacked, HP Sure Start restores the BIOS to its previously safe state,

without user intervention. Those select computer models ship with HP Sure Start configured and enabled.

HP Sure Start is configured and already enabled so that most users can use the HP Sure Start default

configuration. Advanced users can customize the default configuration.

To access the latest documentation on HP Sure Start, go to

http://www.hp.com/support

Chapter 8 Statement of memory volatility

Summary of Contents for Elite c645 G2 Chromebook


















































































Search results

Summary of Contents for Elite c645 G2 Chromebook

Reviews:

Related manuals for Elite c645 G2 Chromebook

Brands by name

Popular brands

HP Elite c645 G2 Chromebook, Maintenance And Service Manual

Search results

Summary of Contents for Elite c645 G2 Chromebook

Reviews:

Related manuals for Elite c645 G2 Chromebook

Brands by name

Popular brands