To replace the component, reverse the removal procedure.
Remove and replace the front panel board for the PXIe configuration
Procedure
1.
on page 23).
2.
on page 23).
3.
Remove the fixed front top cover (
Removing the fixed front top cover of the PXIe system
25).
4.
Disconnect any cables connected to the front panel.
5.
Remove the REF IN and REF OUT clock connectors.
Note the color and location of the connectors while removing them to avoid confusion while reinstalling
them. For REF connector locations, see
on page 49.
6.
Using a Torx screwdriver, remove the four T-10 Torx screws, and then remove the front-end bezel.
2
1
1
1
1
7.
Disconnect the cables from the rail board assembly.
34
Remove and replace the front panel board for the PXIe configuration
Summary of Contents for Edgeline EL4000
Page 18: ...18 Customer self repair ...
Page 19: ...Customer self repair 19 ...
Page 20: ...20 Customer self repair ...
Page 65: ...wireless wide area network Acronyms and abbreviations 65 ...
