2-6
Table 2-3
display link-aggregation member-port command output description
Field
Description
Flags
One-octet LACP state flags field. From the least to the most significant
bit, they are represented by A through H as follows:
z
A indicates whether LACP is enabled. 1 for enabled and 0 for
disabled.
z
B indicates the timeout control value. 1 for short timeout, and 0 for
long timeout.
z
C indicates whether the link is considered as aggregatable by the
sending system. 1 for true, and 0 for false.
z
D indicates whether the link is considered as synchronized by the
sending system. 1 for true, and 0 for false.
z
E indicates whether the sending system considers that collection of
incoming frames is enabled on the link. 1 for true and 0 for false.
z
F indicates whether the sending system considers that distribution
of outgoing frames is enabled on the link. 1 for true and 0 for false.
z
G indicates whether the receive state machine of the sending
system is using default operational partner information. 1 for true
and 0 for false.
z
H indicates whether the receive state machine of the sending
system is in the expired state. 1 for true and 0 for false.
If a flag bit is set to 1, the corresponding English letter that otherwise is
not output is displayed.
Aggregation Interface
Aggregate interface to which the port belongs
Local:
Port Number
Port Priority
Oper-key
Flag
Information about the local end:
z
Port Number: Number of the port.
z
Port Priority: LACP priority of the port.
z
Oper-key: Operational key
z
Flag: LACP protocol state flag.
Remote:
System ID
Port Number
Port Priority
Oper-key
Flag
Information about the remote end:
z
System ID: System ID of the remote end, comprising the system
LACP priority and the system MAC address.
z
Port Number: Number of the port.
z
Port Priority: LACP priority of the port.
z
Oper-key: Operational key
z
Flag: LACP protocol state flag.
Received LACP Packets
Number of LACP packets received
Illegal
Number of illegal packets
Sent LACP Packets
Number of LACP packets sent
display link-aggregation summary
Syntax
display link-aggregation summary
View
Any view
Summary of Contents for E4510-48G
