1-2
<Sysname> quit
******************************************************************************
* Copyright (c) 2004-2009 3Com Corp. and its licensors. All rights reserved. *
* This software is protected by copyright law and international treaties. *
* Without the prior written permission of 3Com Corporation and its licensors,*
* any reproduction republication, redistribution, decompiling, reverse *
* engineering is strictly prohibited. Any unauthorized use of this software *
* or any portion of it may result in severe civil and criminal penalties, and*
* will be prosecuted to the maximum extent possible under the applicable law.*
******************************************************************************
User interface aux0 is available.
Please press ENTER.
<Sysname>
%Apr 28 04:33:11:611 2005 Sysname SHELL/5/LOGIN: Console login from aux0
authentication-mode
Syntax
authentication-mode
{
none
|
password
|
scheme
}
View
User interface view
Default Level
3: Manage level
Parameters
none
: Does not authenticate users.
password
: Authenticates users using the local password.
scheme
: Authenticates users locally or remotely using usernames and passwords.
Description
Use the
authentication-mode
command to specify the authentication mode.
z
If you specify the
password
keyword to authenticate users using the local password, remember to
set the local password using the
set authentication password
{
cipher
|
simple
}
password
command.
z
If you specify the
scheme
keyword to authenticate users locally or remotely using usernames and
passwords, the actual authentication mode depends on other related configuration. Refer to the
AAA-RADIUS-HWTACACS module of this manual for more.
After you specify to perform local password authentication, when a user logs in through the Console
port, a user can log into the switch even if the password is not configured on the switch. But for a VTY
user interface, a password is needed for a user to log into the switch through it under the same
condition.
Summary of Contents for E4510-48G
