HP E4510-48G, Command Reference Manual

Page: 721 / 1334

7-4
<Sysname> system-view
[Sysname] mac-authentication interface GigabitEthernet 1/0/1
Mac-auth is enabled on port GigabitEthernet1/0/1.
Or
<Sysname> system-view
[Sysname] interface GigabitEthernet 1/0/1
[Sysname-GigabitEthernet1/0/1] mac-authentication
Mac-auth is enabled on port GigabitEthernet1/0/1.
mac-authentication domain
Syntax
mac-authentication domain isp-name
undo mac-authentication domain
View
System view
Default Level
2: System level
Parameters
isp-name : ISP domain name, a case-insensitive string of 1 to 24 characters that cannot contain any
forward slash (/), colon (:), asterisk (*), question mark (?), less-than sign (<), greater-than sign (>), or
@.
Description
Use the mac-authentication domain command to specify the ISP domain for MAC authentication.
Use the undo mac-authentication domain command to restore the default.
By default, the default ISP domain is used for MAC authentication users. For information about the
default ISP domain, refer to the domain default enable command in AAA Commands of the Security
Volume .
Examples
# Specify the ISP domain for MAC authentication as domain1.
<Sysname> system-view
[Sysname] mac-authentication domain domain1
mac-authentication timer
Syntax
mac-authentication timer { offline-detect offline-detect-value | quiet quiet-value | server-timeout
server-timeout-value }
undo mac-authentication timer { offline-detect | quiet | server-timeout }