HP E4510-48G, Command Reference Manual

Page: 711 / 1334

5-2
dot1x timer ead-timeout
Syntax
dot1x timer ead-timeout ead-timeout-value
undo dot1x timer ead-timeout
View
System view
Default Level
2: System level
Parameters
ead-timeout-value : EAD rule timeout time, in the range 1 minute to 1440 minutes.
Description
Use the dot1x timer ead-timeout command to set the EAD rule timeout time.
Use the undo dot1x timer ead-timeout command to restore the default.
By default, the timeout time is 30 minutes.
Related commands: display dot1x .
Examples
# Set the EAD rule timeout time to 5 minutes.
<Sysname> system-view
[Sysname] dot1x timer ead-timeout 5
dot1x url
Syntax
dot1x url url-string
undo dot1x [ url-string ]
View
System view
Default Level
2: System level
Parameters
url-string : Redirect URL, a case-sensitive string of 1 to 64 characters in the format http://string/.
Description
Use the dot1x url command to configure a redirect URL. After a redirect URL is configured, when a
user uses a Web browser to access networks other than the free IP, the device will redirect the user to
the redirect URL.
Use the undo dot1x url command to remove the redirect URL.