HP E4510-48G, Command Reference Manual

Page: 68 / 1334

1-14
Member of group1:
GigabitEthernet1/0/3 GigabitEthernet1/0/4 GigabitEthernet1/0/5
GigabitEthernet1/0/6 GigabitEthernet1/0/7 GigabitEthernet1/0/8
Member of group2:
None
Table 1-6 display port-group manual command output description
Field Description
Member of group Member of the manual port group
display storm-constrain
Syntax
display storm-constrain [ broadcast | multicast ] [ interface interface-type interface-number ]
View
Any view
Default Level
1: Monitor level
Parameters
broadcast : Displays the information about storm constrain for broadcast packets.
multicast : Displays the information about storm constrain for multicast packets.
interface interface-type interface-number : Specifies an interface by its type and number.
Description
Use the display storm-constrain command to display the information about storm constrain.
If you provide no argument or keyword, this command displays the information about storm constrain
for all types of packets on all the interfaces.
Examples
# Display the information about storm constrain for all types of packets on all the interfaces.
<Sysname> display storm-constrain
Abbreviation: BC - broadcast; MC - multicast; UC - unicast
Flow Statistic Interval: 10(second)
PortName Type LowerLimit UpperLimit CtrMode Status Trap Log SwiNum Unit
------------------------------------------------------------------------------
GE1/0/2 BC 1 2 N/A normal on on 0 kbps
GE1/0/2 MC 1 5 N/A normal on on 0 ratio
Table 1-7 display storm-constrain command output description
Field Description
Flow Statistic Interval Interval for generating storm constrain statistics