HP E4510-48G, Command Reference Manual

Page: 655 / 1334

2-8
key (RADIUS scheme view)
Syntax
key { accounting | authentication } string
undo key { accounting | authentication }
View
RADIUS scheme view
Default Level
2: System level
Parameters
accounting : Sets the shared key for RADIUS accounting packets.
authentication : Sets the shared key for RADIUS authentication/authorization packets.
string : Shared key, a case-sensitive string of 1 to 64 characters.
Description
Use the key command to set the shared key for RADIUS authentication/authorization or accounting
packets.
Use the undo key command to restore the default.
By default, no shared key is configured.
Note that:
z
You must ensure that the same shared key is set on the device and the RADIUS server.
z
If authentication/authorization and accounting are performed on two servers with different shared
keys, you must set separate shared key for each on the device.
z
You can use the commands to change the settings only when no user is using the RADIUS
scheme.
Related commands: display radius scheme .
Examples
# Set the shared key for authentication/authorization packets to hello for RADIUS scheme radius1 .
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] key authentication hello
# Set the shared key for accounting packets to ok for RADIUS scheme radius1 .
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] key accounting ok
nas-ip (RADIUS scheme view)
Syntax
nas-ip ip-address