HP E4510-48G, Command Reference Manual

Page: 640 / 1334

1-25
When some users need to access the network temporarily, you can create a guest account and specify
an expiration time for the account. When a user uses the guest account for local authentication and
passes the authentication, the access device checks whether the current system time is within the
expiration time. If so, it permits the user to access the network. Otherwise, it denies the access request
of the user.
Note that if you change the system time manually or the system time is changed in any other way, the
access device uses the new system time for time validity checking.
Examples
# Configure the expiration time of user abc to be 12:10:20 on May 31, 2008.
<Sysname> system-view
[Sysname] local-user abc
[Sysname-luser-abc] expiration-date 12:10:20-2008/05/31
group
Syntax
group group-name
undo group
View
Local user view
Default Level
3: Manage level
Parameters
group-name : User group name, a case-insensitive string of 1 to 32 characters.
Description
Use the group command to specify the user group for the local user to belong to.
Use the undo group command to restore the default.
By default, a local user belongs to user group system , which is automatically created by the device.
Examples
# Specify that local user 111 belongs to user group abc .
<Sysname> system-view
[Sysname] local-user 111
[Sysname-luser-111] group abc
idle-cut enable
Syntax
idle-cut enable minute
undo idle-cut enable